Al Si Phase Diagram Showing Hypo And Hyper Eutectic Alloys Download The alloy is hypo and hyper eutectic if the percentage of si in the al si alloy is lower and higher than 12.6 wt.%, respectively [9, 10]. the mechanical properties of al si alloys are enhanced in. In an al si binary system [1] as shown in figure 1, the hypo eutectic range exists for a silicon composition that is lower than 12.2 at% (12.7 wt%) of silicon. in the microstructure of hypo.
Al Si Phase Diagram Showing Hypo And Hyper Eutectic Alloys Download The al si system is a simple binary system with limited solubility of silicon in aluminium. the al si phase diagram ( fig. 6) [30] shows that the eutectic reaction takes place at 12.6 wt% of. Si films and fine patches of the α al si eutectic, generally at grain boundary triple points. etching with aqueous 0.5% hf outlines the second phase si particles. the “si blue etch” colors the si preferentially. weck’s color etch for al reveals the regions around the si phase which has been denuded of si, details that cannot be table 1. When the composition of an alloy places it to the left of the eutectic point it is called hypo eutectic . note, though, that this is merely convention. if the phase diagram had been drawn the other way around, with 100%a on the right and 100%b on the left, then the same alloy would be called hyper eutectic , as it would be to the right of the. In al si hypo and eutectic alloys the first phase to solidify is the α al. the al si eutectic is fibrous and the si particles are long and needle like [74, 75]. additions of si below 0.01wt% are usually dissolved in the aluminum matrix, increasing the mechanical properties. further additions result in the precipitation of the al si eutectic.
Comments are closed.