How To Read A Tape Measure Plus Tricks Tinged Blue Take a look at the side of your tape measure, near the belt clip. you will find a measurement listed there. this shows you the length of your tape measure's housing. just butt the housing up against the wall. make a note of the measurement on your tape, and add it to the length of the housing. The slightly shorter lines refer to ¼” increments. the first one will be ¼” and the one on the right side of the ½” mark will be ¾”. the lines that are between the shortest and the ¼” markers designate ⅛”. and the shortest lines mark 1 16”. when reading a tape measure left to right, here’s what the marks refer to in order.
How To Read A Tape Measure Plus Tricks Tinged Blue The parts of a tape measure. before we dive into how to read tape measure increments , let’s go over the lay of the land. on the outside of the tape measure, you will see a belt clip, a blade lock (or button) and the tip or hook, also known as the rivet, which is the end of the tape. Find the whole centimeter number that’s closest to the endpoint. 2. then, if necessary, count any tick marks (in millimeters) that are left over and add them to the total measurement as a decimal. for example, something that measures 15 centimeters and 4 millimeters will have a measurement of 15.4 centimeters. Read the nearest mark to find the measurement. look where the end of the object you're measuring lines up with a marking on the tape. find the last full inch or centimeter mark on the tape. then, count the marks between the full unit on the tape and the end of the object to find the full measurement. To read a tape measure, find the number next to the large tick, and then find how many small ticks past it the measurement is. add the number next to the large tick with the fractional tick to get the measurement. for instance, if the length of an object measures five small ticks past the number 4 tick, then the measurement is 4 5 ⁄ 16 “.
Comments are closed.